. MAINTENANCE SERVICE PROCEDURE WARNING at 4 - 23 Antifreeze is toxic. When open th e drain valve, be careful not to get water containing antifreeze on yo u. If it gets in your eyes, flush your eyes with large amoun t of fresh water and see a doctor at once When changing the coolant or dr aining the coolant from the radiator befor e carrying out repairs, ask a specialist company to handle any coolant containing drainage water ditches or drain it The coolant is already diluted w ith distilled water. (For details of the distilled water, see "CO OLANT AND WATER FOR DILUTION (PAGE 4-6)". C heck the density with a coolant teste r.
Prepare a container whose cap acity is larger than the specified coolant volume to catch dra Prepare a hose to use when filli ng with coolant. 1. Stop the machine on level 2. Turn radiator cap (3) slowly, 3. Prepare a container to catc h the drained coolant, then op radiator drain valves (4) an and drain the water. d (5) at the bottom of the radiat 4. After draining the water, clos e drain valves (4) and (5), then with city water. When the radiator is filled w ith water, start the engine, run 5. low idling, raise the water te mperature to at least 90 °C, th 0 minutes. nd drain the water. run the engine for approx. 1 6. Open drain valves (4), (5), a 7.
After draining the water, clea n the cooling system with cleani agent. For the cleaning method, se e the instructions for the cleani agent. (5). 8. Close drain valves (4), and 9. Add Supercoolant through t he water filler up to the bottom o f the For details of the Supercool ant density, see the COOLANT