. MAINTENANCE SERVICE PROCEDURE WHEN REMOVING TRACK WARNING METHOD OF TIGHTENING SHOE BOLT 4 - 33 Depending on the situatio n, the operation t o remove the track may be extremely dangerous. Befo re removing the track , if the procedure " WHE NLOOSENING TENSION( PAGE 4-32)" does not lo osen the track tension, contact your Komat su distributor for repairs. CHECK AND TIGHTEN TRACK SHOE BOLTS If th e machine is used with track shoe bolts being l oose , they will break, so tighten an y loose b olts i mmediatel 1. First ti ghten to a tig htening torque o f 980 ± 98 N m (100 ± 1 0 kgm, 723.3 ± 72.3 lbft) and the n check that t he link contac t surfaces a re in colse conta 2.
After c hecking, tig hten a further 18 0° ± 10° METHOD OF TIGHTENING MASTER LINK CONNECTING BOLT 1. Tighte n first to a ti ghtening torque of 98 0 ± 98 Nm (10 0 ± 10 kgm, 723.3 ± 72.3 l bft), t hen check that t he link mating surface is i n close contact. 2. After c hecking, tig hten a further 18 0° ± 10° ORDER FOR TIGHTENING Tighten th e bolts in the order shown in the d iagram on t he r igh