. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN DAMPER CASE AND BREATHER FILTER, CLEAN DAMPER BREATHER WARNING oil. 4 - 79 The oil is at high temperatur e immediately after the machin e has been operated. Wait for the oil to cool down before changing the R efill capacity: 2.2 liter 1. Remove breather (4) 2. Wash out dust remai ning inside of breather with dies el oil and flushing oil. 3. Install breather (4) to 4. Remove slit plate (3) , breather filter (5) and holder (6) on the per cover. the upper part of the dam 5. Wipe off dusts stuck t o the slit plate and holder a nd th en wash them with clean light oil or detergent liquid. Replace the filter with 6. Open the inspection 7.
Remove drain plug ( and drain the oil. After draining the oil, 8. Pull out dipstick (1), and add oil to the specified leve l through oil vel is between the H and L marks on see "CHECK OIL LEVEL IN DAMPER GE 4-61)". cover. 9. dipstick. For details, CASE, ADD OIL (PA 10. Close the inspection