Komatsu — EVERY 4000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE 4 - 88 CHECKING FOR LOOSENESS OF HIGH-PRESSURE CLAMP, HARDENING OF RUB BER n the drawing in the illustrations Check for an y looseness in the high-pressur e clamp mounting bolts (1) to (15) i the illustrations below. Chec k visually and feel with your finge r to check that the rubber has not h ardened. If there is any problem, the problem part must be replaced. Contact y our Komatsu distributor for part repl acement. NOTICE If the engine c ontinues to be used when there are l oose bolts, hardened rubber, or missing parts, there is danger of damag e or breakage occurrin g due to vibration and wear at the connections of high-pressure piping.

Always check that the proper . tha he pr oper high-pressure piping clamps are correctly installed