. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS shows the mode for setting to distributor when using this using this function. 3 - 34 4. Mode to rotate cooling fan a t maximum speed The diagram on the right is t he mode for rotating the cooling fan at maximum speed. On this screen, operate the buzzer cance switch to to rotate the co oling fan at the maximum speed. Note that this mode is effe ctive only when the display in the diagramon the right is being given. After leaving this mode, the screen returns to the norma l mode. 5. Mode for no-injection crank The diagram on the right no-injection cranking. Please contact your Kom function. 6.
Setting blade tilt angle limit The diagram on the right sh ows the mode for setting the blade tilt 7. Mode for prelube The diagram on the right shows the mode for machines Please contact your Komatsu unction. shows the mode for emergency equipped with prelube. distributor when using this f The diagram on the right starting when there is a failu re in the prelube equipment. ( For machines equipped with pr elube) this screen and the information When the monitor shows switch is turned, the bottom line of the display is turned OFF. In this condition, it is possi ble to exit this mode and start the engine without using the pre lube. In addition, once the engine is stopped, this mode is can celed.
REMARK ction mode, operate the buzzer cancel switch to . To return to the function sele ction mode, operate the buzzer c ancel switch Th e brightness of the backli ghting of the monitor panel differs according t o whether the fr ont lamp is lit or not. Entering this mode when the front lamps are lit makes it possible to adjust the brightness w hen the fr ont lamps are lit. In the same way, en tering this mode when the front lamps are not lit makes it possible to adjust the mps are not lit. djust the brightness when the front la