. OPERATION EXPLANATION OF COMPONENTS JOYSTICK (STEERING, DIRECTIONAL AND GEAR SHIFT LEVER) (PCSS lever) Lever (2) is used to switch direction of travel and to steer the machine. Forward-reverse shifting Position (a): FORWARD Position (b): REVERSE Position N: Neutral Move to the front to drive forward; move to the rear to drive in reverse. right to turn the machine. The and gearshift lever is at the and switch (c) or switch (d) is is pressed, the transmission switch is pressed, the in each speed range, see "SPECIFICATIONS (PAGE 5-2)". 3 - 45 REMARK PCCS: Palm command control sy or rear, operate the lever partially to the left or r ame direction as the lever is operated.
t or right, the machine will turn in a small radius. Position Position With th machin e will turn gradually in the s ame direction as the lever is oper If t he le ver is moved fully to the lef t or right, the machine will turn in a small REMARK If t he le ver is released when steeri ng the machine, the lever will retu rn to the (a) pos ition or the ( b) position a nd the machin e will be returned to straigh t movement. Gear shifting the steering, directional, When FORWARD or REVERSE positio pushed , the transmission speed w UP switch (c): Each time the switc will shift up one spe DOWN switch (d):
Each time t transmission wi For details of the maximum spe Fo REMARK The speed range being used is displayed on the monitor panel a ccording to the gearshift op eration Neutral:N is displayed on the d FORWARD 2nd:F2 is displaye REVERSE 3rd:R3 is displayed Whe n the parking brake lever i For details of the method of the"SHIFTIN PAGE 3-126)".Shift mode selection m eans the selected speed range is displayed at th e N position before starti ng.