OPERATION 12.4 MOVING THE MACHINE WARNING When moving the machine, check that the area around the machine is safe, then sound the horn before starting the engine. Do not allow people near the machine. A blind spot exists behind the machine, so be particularly careful when traveling in reverse. When starting the machine on a slope, set the transmission cut-off switch (1) to the OFF position, depress the left brake pedal (2) while depressing the accelerator pedal (3) , then gradually release the left brake pedal (2) to allow the machine to start. 1. Check that the caution pilot lamp (4) is not lit up. 2.
Set the safety lock (7) on the bucket control lever (5) and lift the arm control lever (6) to the FREE position. WA450-3MC 2-54