OPERATION 3. Operate the lift arm control lever (6) to set the work equipment to the travel mode. 4. Depress the right brake pedal (8) and turn the parking switch (9) to the OFF position to release the parking brake. If the parking brake remains actuated when the parking brake switch (9) is in the OFF position, turn the parking brake ON and then OFF again. 5. Set the speed control lever (10) to the desired position. 6. Set the directional lever (11) to the desired position. 7. Release the right brake pedal (8) and depress the accelerator pedal (3) to move the machine. WA450-3MC 2-55