WARNING: Failure to follow these safety precautions may lead to a serious accident. SAFETY 7. PRECAUTIONS DURING OPERATION 7.1 BEFORE STARTING ENGINE Carry out the following checks before starting the engine at the beginning of the work shift. Failure to carry out the checks may lead to serious injury or damage. Completely remove all wood chips, leaves, grass, paper and other flammable materials accumulated in the engine compartment and near the battery. Check fuel, lubrication and hydraulic systems for leaks, and have leaks repaired. Clean up excess oil, fuel or other flammable fluids.
Return all fuel containers to their proper storage place, remove all parts and tools from the operator’s compartment, and remove dirt from the mirrors, handrails and steps. Check points Check the coolant level, fuel level, and oil level in the engine. Check for clogged air cleaner, and check for damage to the electric wiring. Checks before starting Adjust the operator’s seat to a position where it is easy to carry out operations, and check for wear or damage to the seat belt and seat belt mounting equipment. Adjusting operator’s seat Handling seat belt Check that the gauges work properly, and check that the control levers are at the PARKING position.
Method of checking operation of gauges Remove all dirt from the surface of the window glass and lights to ensure good visibility. Adjust the side mirror to a position that gives best view from the operator’s seat, and clean the mirror surface. Replace broken mirror glass. Check that the front lamps and working lamps operate properly. Repair broken lamps promptly. Check that the safety lock is in the LOCK position before starting the engine. Check that a fire extinguisher of the proper type is present and check the method of using it. Do not operate the machine near fire or flame. WA450-3MC 1-9 CHECKS BEFORE STARTING ENGINE