WARNING: For reasons of safety, always follow these safety precautions. SAFETY 7.2 OPERATING MACHINE Walk around your machine again just before mounting it, and check for people and objects that might be in the way. Never start the engine if a warning tag has been attached to a control lever (1). When starting the engine, sound the horn to alert nearby personnel. Start and operate the machine only when seated. An additional worker may ride in the machine only when sitting in a passenger seat. Do not allow anyone to ride on the machine body.
Failure to carry out the checks properly after starting the engine will lead to delays in discovery of abnormalities, and this may lead to serious injury or damage to the machine. When carrying out the checks, use a wide area where there are no obstructions. Do not allow anyone near the machine. Check the operation of the gauges and equipment, and check the operation of the bucket, lift arm, brakes, travel system and steering system. Listen for abnormality in the sound of the machine; check for vibration, heat, and/or smell; check gauges. Check also that there is no leakage of air, oil or fuel. If any abnormality is found, carry out repairs promptly.
If the machine is used when it is not in proper condition, it may lead to serious injury or damage to the machine. Before traveling or starting operations, check that safety bar is securely locked in the FREE position. WA450-3MC 1-10 WHEN STARTING ENGINE CHECKS AFTER STARTING ENGINE