BODY (UPPERSTRUCTURE) / Pilot Shut-Off Valve REMOVAL AND INSTALLATION OF PILOT SHUT-OFF VALVE CAUTION: Bleed air from the hydraulic oil tank before doing any work. (Refer to BLEED AIR FROM HYDRAULIC OIL TANK on W1-4-1.) Removal 1. Remove screws (2) (2 used) from cover (3). Remove cover (3) from bracket (6). 2. Remove sems bolts (11) (4 used) from cover (10). Remove cover (10) from bracket (6). : 13 mm 3. Remove spring (8) from block (7) and bracket (9). 4. Remove bolts (1) (2 used) from lever (4). Remove lever (4) from block (5). W4GB-02-07-001 12 13 : 14 mm 5. Disconnect hoses (12, 15, 16 and 17) from pilot shut-off valve (14). Cap the open ends. 14 : 19 mm, 22 mm 6.
Remove bolts (13) (2 used) from bracket (6). Remove pilot shut-off valve (14) from bracket (6). : 17 mm 15 W4GB-02-07-002 W4GB-02-07-003 W2-9-1 3 2 4 7 5 6 8 8 9 1 10 11 11 16 17