hitachi — Removal and Installation of Drive Unit

BODY (TRAVEL SYSTEM) / Drive Unit Installation 1. Install the gasket to the engine mounting position of the torque converter (68) housing. CAUTION: Engine weight: 540 kg (1200 lb) Drive unit (9) weight: 710 kg (1600 lb) 1. Attach a nylon sling onto drive unit (9). Hold drive unit (9). 2. Install the flywheel housing in the engine and the torque converter (68) housing with bolts (65) (12 used). 65 64 9 : 36 N m (3.7 kgf m, 26.5 lbf ft) 3. Apply LOCTITE #262 onto bolts (64) (12 used). Install the input plate and the engine flywheel in torque converter (68) with bolts (64) (12 used). : 14 mm 68 : 14 mm : 46 N m (4.7 kgf m, 34 lbf ft) 4. Apply liquid gasket onto cover (67).

Install cover (67) to the torque converter (68) housing with bolts (66) (8 used). 67 66 : 41 N m (4.2 kgf m, 30 lbf ft) : 14 mm W4GD-03-02-009 W3-2-7