hitachi — Removal and Installation of Drive Unit

BODY (TRAVEL SYSTEM) / Drive Unit 6. Attach a nylon sling onto the engine and drive unit (9). Hold the engine and drive unit (9). 7. Set rubbers (57, 58) (6 used for each) and plates (56) (6 used) to the main frame by aligning the hole center. 8. Pass bolts (61) (4 used) and bolts (63) (2 used) to brackets (59, 62) (2 used for each) through washers (60) (6 used). Lower the engine and drive unit (9) while aligning the mounting hole center on the mount part. 9. Install washers (55) (6 used) and nuts (54) (6 used) to bolts (63) (2 used) and (61) (4 used). Engine 9 W4GD-03-02-008 61 61 60 60 61 59 58 60 63 60 59 63 60 62 58 62 58 57 58 57 55 54 : 27 mm 56 :

315 N m (32 kgf m, 230 lbf ft) 57 57 55 56 55 54 54 56 W4GC-03-02-230 Detail A W3-2-8 56 55 54