BODY (TRAVEL SYSTEM) / Brake Valve REMOVAL AND INSTALLATION OF BRAKE VALVE CAUTION: Before doing any work, stop the engine and depress/release the brake pedal about 80 times in order to release the pressure in the service brake circuit. (The pedal can be depressed lightly when the pressure is released.) Removal 1. Remove sems bolts (2) (3 used) from cover (3). Remove cover (3) from floor plate (1). : 14 mm 2. Disconnect hoses (4 to 6, 8 and 9) from brake valve (7). W4GB-03-05-013 : 22 mm, 27 mm 3. Remove bolts (10) (3 used) from mounting plate (11). Remove brake valve (7) from mounting plate (11). 7 8 W4GB-03-05-011 : 12 mm 7 10 11 W4GB-03-05-012 W3-5-1 1 2 3 4 9 5 6 9