BODY (TRAVEL SYSTEM) / Brake Valve Installation 1. Install brake valve (7) to mounting plate (11) with bolts (10) (3 used). : 12 mm 7 : 9.5 N m (1 kgf m, 7 lbf·ft) 2. Connect hoses (4 to 6, 8 and 9) to brake valve (7). 10 W4GB-03-05-012 11 : 22 mm 4 : 39 N m (4 kgf m, 28.5 lbf·ft) : 93 N m (9.5 kgf m, 69 lbf·ft) 3. After installing brake valve (7), adjust the position of switch (12) in the following procedures. When switch (12) is removed and the pedal is free, adjust the position of bracket (14) so that bracket (14) is parallel to the switch (12) mounting part of bracket (13). Push the end of switch (12) onto bracket (14) to 4 to 5 mm (0.16 to 0.2 in). Secure switch (12).
At this time, check that the pedal returns to the original position when moving and releaseing the pedal. Check the sound “tick, tick” when switch (12) is operated. 4. Install cover (3) to floor plate (1) with sems bolts (2) (3 used). : 27 mm 5 6 7 8 9 W4GB-03-05-011 12 13 14 W4GB-03-05-012 1 : 19.5 N m (2 kgf m, 14.5 lbf·ft) : 14 mm 2 3 W4GB-03-05-013 W3-5-2