Kubota — Safety Aspects when Lifting with Cables or Straps

45 LIFTING OF THE EXCAVATOR 3 DANGER To avoid personal injury or death: The correct instructions for safe handling are described here. Read these instructions carefully before moving the machine. Make sure that the operating personnel read the operator's manual carefully. Safety Aspects when Lifting with Cables or Straps Abide by following steps when lifting: 1. Do not lift loads that exceed the maximum load capacity of the crane. 2. Choose correct equipment suitable to the weight, size and form of the load. 3. First assess the center of gravity of the load, position the hook directly over the load and lift the load so that the center of gravity of the load is as low as possible. 4.

The steel cables or straps must be fi xed in the middle of the hook. 5. The load must be lifted vertically from the ground. 6. Do not enter the working area under suspended loads and do not move the load over people. The load must only be moved in an area where the balance can be easily maintained. Basics when Lifting with Cables or Straps 1. The lifting and crane operation is to be undertaken according to the guidelines described. 2. The equipment for lifting mentioned in these instructions are only given as reference, the standards concerning strength, control and other details are based on the respective applicable guidelines.