46 Lifting Procedure for the Excavator 3 WARNING To avoid personal injury or death. Do not use the hooks on the roof of canopy and cabin for lifting the excavator. General guidelines for lifting 1. Lifting position. (see illustration) 1) Pull in the boom towards rear. 2) Pull in the arm completely. 3) Pull in the bucket completely. 4) Adjust the swing angle to the right end. 5) Swing frame so that dozer blade is to the rear and frame is parallel with tracks. 6) Raise the dozer blade fully. 7) Insert the swing lock pin. 2. Attaching the steel wires. 1) Always hook the excavator at three points.
(one on the boom and right and left of the dozer) 2) Always use a shackle on each lifting hole when attaching the cables or straps. 3) Using protective material at all places where the cables or straps contact the machine. 4) Keep the angle between the front and rear cables or straps within. 30° (0.52 rad.). 3. Tackle Choose components having enough strength. 4. Lifting 1) Lift slowly and safely 2) Do not enter the excavator area when lifting. 3) Lift the excavator horizontally. (Modify wire connections according to needs) (A) Approx. 157 in. (4000 mm) (B) Approx. 98 in. (2500 mm) (C) Approx. 30° (0.52 rad.)