Kubota — Washing the Whole Machine

53 Check Radiator and Oil Cooler 3 CAUTION To avoid personal injury: Always stop the engine and remove the key before checking the radiator and the oil cooler. Wear eye protection when cleaning with compressed air. Cleaning of Engine and Electrical Wiring 3 CAUTION To avoid personal injury: Always stop the engine and remove the key before cleaning the wiring, cables and engine. Before starting, check whether fl ammable substances have gathered on the battery, the cables and wiring, the muffl er or on the engine. If so, remove thoroughly. 1. Check if the fi ns and ribs are clogged. If so clean with compressed air or steam. 2. Check the rubber hoses for damage and replace if cracked or old.

Check if the hose clamps are tight enough. Checking the Electrical Circuit Check the electrical circuitry for disconnections, shorts or loose terminals. Washing the Whole Machine IMPORTANT: Do not wash the excavator with the engine running. Water could enter the air fi lter and damage the engine. Make sure that the air fi lter is kept dry. (1) Radiator (2) Oil cooler (1) Rubber hoses (2) Clamps IMPORTANT: Radiator and oil cooler fi ns and ribs must be clean in order not to overheat the engine and allow free fl ow of air through the cooling elements.