Kubota — Replacing the Bucket

69 4. Mount a new point on the adapter. Replacing the Bucket 3 CAUTION To avoid personal injury: The bucket can tilt over and cause accidents if in an unstable position. Therefore: 1) Only change the bucket if no other persons are in the area. 2) Lower the bucket on an even ground and make sure that it will not tilt when touched. (1) Rubber plug (2) Lock pin (3) Point (4) Tooth adapter 5. Align the holes of the point and adapter and knock in the rubber plug together with the lock pin until the top surface of the pin is fl ush with the top surface of the adapter. (It is recommended to replace the rubber plug and lock pin when replacing the point.)