Kubota — Bucket Tooth Replacement

68 Special Information when Using Rubber Tracks 1. When turning, make a slow swing turn. Avoid spin turns to lessen lug wear and entry of dirt. 2. The relief valve may be activated if too much dirt and sand clog the tracks. In this case move the machine for a short distance straight backwards to let the earth and sand fall off, then a turn can be made. 3. Avoid using rubber track on riverbeds, stony underground, ferro-concrete and on iron plates. The rubber can damage as well as increase wear on the tracks. EXCHANGE OF BUCKET TEETH AND SIDE CUTTERS [JPN BUCKET VERSION] Bucket Tooth Replacement 3 CAUTION To avoid personal injury: Wear eye protection when changing the tooth points. 1.

Position a screw driver or similar tool above the lock pin and knock out the pin and rubber plug with a hammer. 2. Remove the worn point from the adapter by hitting it with a hammer. 3. Clean the adapter.