Komatsu — 6.9.1 DESCRIPTION AND CONTROL

ARRANGEMENT FOR THE INSTALLATION OF THE CLAMSHELL BUCKET 6.9 ARRANGEMENT FOR THE INSTALLATION OF THE CLAM- SHELL BUCKET 6.9.1 DESCRIPTION AND CONTROL DANGER The machine equipped with the revolving clamshell bucket cannot travel on roads. The installation of the clamshell bucket must be carried out at the work site; if the machine must travel on roads, remove the bucket. The bucket can swing on the arm coupling; during use, take in consideration the increase in size due to the swinging. The machine can be arranged for the application of a revolving clamshell bucket on the backhoe, instead of the standard bucket.

For the swing of the clamshell bucket an independent hydraulic circuit controlled by an additional distributor is provided, while for its opening and closing the standard bucket opening and folding circuit is used, excluding the control cylinder (See “6.9.2 INSTALLING THE CLAMSHELL BUCKET”). The other controls for the movements of the backhoe (boom, arm and boom swing) remain unchanged (See “3.3.5 (pos. 15-16) BACKHOE CONTROL LEVERS”). The additional distributor that operates the swing is controlled by means of a pedal positioned on the left side of the backhoe control lever unit. The rotation is operated through the following movements:

1 - The clockwise rotation of the bucket is obtained by pressing the pedal with the toe. 2 - The anticlockwise rotation of the bucket is obtained by pressing the pedal with the heel. The arrangement includes also the fixed connection of the oil delivery and return pipes near the coupling of the bucket. RWA35110 239