ARRANGEMENT FOR THE INSTALLATION OF THE MANUAL HYDRAULIC HAMMER 6.10 ARRANGEMENT FOR THE INSTALLATION OF THE MANUAL HYDRAULIC HAMMER DANGER The manual hydraulic hammer is very noisy; always wear headphones when using it. The manual hydraulic hammer transmits intense vibrations that may cause psychical and physical stress to the operator; be extremely careful especially at the end of work and have short rests when you lose sensibility in the upper limbs. 242 RWA03830 15 The machine can be provided with delivery (1) and return (2) couplings for the use of a manual hydraulic hammer; the con- nection to the machine is made up by two flexible pipes (3).
The hammer circuit is separated from the normal circuits of the machine by means of a solenoid valve controlled by a push but- ton positioned on the side dashboard. The operation of the push button (4), which includes a connec- tion warning light, energizes the solenoid valve that permits the flow of the oil necessary for the operation of the hammer; if the push button (4) is pressed a second time, the solenoid valve is deenergized and the oil flow is interrupted. For operation, the hammer is provided with a specific control. (See the specific operation manual). 10 20 5 25 RPM x 100 30 electronic 4 10 20 5 25 RPM x 100 30 electronic 4 2 3 1 RWA03840