Komatsu — Komatsu K EAM04 9 700 T Operation and Maintenance Manual for Bulldozers

OPERATION OPERATION CHECK BEFORE STARTING 3 Always check the items in this section before starting the engine each day. CHECK COOLANT LEVEL, ADD COOLANT q Do not open the radiator cap unless necessary. Wait for the engine to cool down before checking the coolant in the subtank. q Immediately after the engine is stopped, the coolant is at a high temperature and the radiator is under high internal pressure. If the cap is removed to check the coolant level in this condition, there is a hazard of burns. Wait for the temperature to go down, then turn the cap slowly to release the pres- sure before removing it. 1.

Open the engine side cover on the left side of the chassis, and check that the coolant is between the FULL and LOW marks on sub-tank (1). If the water level is low, add water to the FULL level through the water filler port in sub-tank (1). REMARK In summer, the coolant may overflow from the sub-tank drain hose. This is no problem. It occurs because too much coolant has been added. 2. After adding coolant, tighten the cap securely. 3. If the sub-tank is empty, check for leakage of coolant, then add it to the radiator and sub-tank. 4. After adding coolant, close the engine side cover. 3-74 WARNING