Komatsu — Komatsu K EAM04 9 700 T Operation and Maintenance Manual for Bulldozers

OPERATION OPERATION ADJUST MIRROR Loosen nut (1) of the mirror and adjust the mirror to a position where it gives the best view from the operator's seat. In particular, be sure to adjust the mirror so that people at the rear left or right of the machine can be seen clearly. ADJUST LEFT CONSOLE BOX q Before adjusting the position of the left console box, always set the parking brake lever to the LOCK position. q After adjusting the position of the left console box, push and pull the console box to the front and rear to check that it is locked and cannot move.

If it is not locked properly, the console box may suddenly move during operations, causing misoperation of the steering, forward-reverse, gear shift lever, and resulting in failure. The left console box can be adjusted by 90 mm (3.5 in) in 9 stages to the front or rear. Adjust it to the most suit- able position to match the adjustment of the operator's seat. 1. Pull up lock lever (2) at the rear of console box (1) at the left side of the operator's seat, and set the lock lever to the FREE position. NOTICE Do not grip the steering, forward-reverse, gear shift lever when removing console box (1). There is danger that the lever may break. 2.

With the lock lever (2) pulled up, use your other hand to grip the front of console box (1), then move it to the front or rear with your left and right hands. 3. Move console box (1) to the desired position until a click is heard. Then pull up lock lever (2) and release it. Lock lever (2) automatically returns to LOCK position (L). 3-85 WARNING