OPERATION OPERATION GEARSHIFTING OPERATION USING PRESET MODE FUNCTION 3 If the preset mode function is used, the speed ranges used when the machine travels in forward and reverse can be preset as desired. 1. Set steering, forward-reverse, gear shift lever (1) to the NEUTRAL position (N). 2. When preset mode switch (3) is set to the ON position (a), the function is actuated. 3. When the preset mode function is actuated, [F1-R1] is dis- played at the left side of the bottom line of display panel B (multi-information) on the monitor panel, and the [F1-R1] mode is set. REMARK When preset mode switch (3) is set to the ON position (a), the default [F1-R1] mode is set. 4.
If it is desired to select another mode, press UP switch (U) or DOWN switch (D) on steering, forward-reverse, gear shift lever (1) and display the desired mode on control panel B (multi-information). The types of mode and method of selection are as follows. 「F1-R1 」 「F1-R2 」 「F2-R2 」 「F2-R3 」 DOWN DOWN DOWN UP UP UP q Example of shift control when [F2-R2] mode is set. When steering, forward-reverse, gear shift lever is set to F position, speed range F2 is automatically selected. When steering, forward-reverse, gear shift lever is set to R position, speed range R2 is automatically selected. 3-102