OPERATION OPERATION REMARK Even when the preset mode function is being actuated, it is possible to select the speed range by operating the UP switch or DOWN switch when the machine is traveling forward or in reverse. However, the preset mode remains set as it is. If the steering, forward-reverse, gear shift lever is returned to the NEUTRAL position and then operated again to the FORWARD or REVERSE position, the set speed range is selected. A particular advantage is that when the auto shift down function described below is being actuated, it is possible to save the trouble of shifting up when traveling in reverse after the transmission has shifted down during digging.
AUTO DOWN SHIFT OPERATION 3 If the travel speed drops because of the load conditions when traveling, this function automatically down shifts to a lower speed range. 1. The function is actuated when auto shift down switch (4) on the front panel is set to ON position (b). OFF position (a) : Canceled ON position (b) : Actuated The transmission is automatically shifted down F2 F1, F3 F2, R2 R1, R3 R2. REMARK When the preset mode is being actuated, to ensure safety, the system is set so that it does not shift up after the auto shift down has been actuated. If it is desired to shift up, operate the UP switch (U) manually. However, the preset mode remains set.
If the steering, for- ward-reverse, gear shift lever is returned to the NEUTRAL position and then operated again to the FORWARD or REVERSE position, the preset speed range is again selected. 3-103