Komatsu — Komatsu K EAM04 9 700 T Operation and Maintenance Manual for Bulldozers

TROUBLESHOOTING OPERATION CONNECTING PUMP TO MACHINE q Fit blocks under the tracks to prevent the machine from moving, then release the brake. q Immediately after the engine is stopped, all parts are at high temperature, so do not carry out the oper- ation to install the brake release pump immediately. Wait for the temperature to go down until it is pos- sible to touch the steering case by hand. 1. Fit blocks securely under the tracks to prevent the machine from moving. 2. Remove cover (1) of the central pressure detection port in the right fender. 3. Remove plug (2) from the brake pressure detection port. 4. After removing the plug, install adapter (3).

Install an adapter that fits the mouthpiece of the brake release pump. 5. Connect the hose of the brake release pump to adapter (3) in the brake pressure detection port. 3-136 WARNING