Komatsu — Komatsu K EAM04 9 700 T Operation and Maintenance Manual for Bulldozers

OPERATION TROUBLESHOOTING MONITOR PANEL 3 When an error code appears on the display panel B (multi- information), take appropriate remedies based upon the table below. (1): Display panel B (2): Warning lamp (red) REMARK If different kinds of failures occur at the same time, their failure codes are arranged in the order of seriousness in the display. The order of seriousness in this case is E04, E03, E02 and E01, starting from the most serious one. Note: If an abnormality display appears on display panel B, check the fault code. For details, see “METHOD OF USING FAULT CODE DISPLAY MODE (3-29)“. When contacting your Komatsu distributor, please give the fault code also.

3-143 Action code Display panel B Warning lamp Alarm buzzer Remedy E01 Top line: Displays E01 Bottom line: Displays service meter - - l Failure in part of function, stops. When con- tinuing operations, be extremely careful of ocation of failure. After completing opera- tions, contact Komatsu distributor for repairs E02 Top line: Displays E02 Bottom line: Displays service meter Flashes Sounds Serious failure in part of function, stops. When continuing operations, be extremely careful of location of failure. After completing operations, contact Komatsu distributor for repairs E03 Top line: Displays E03 Bottom line:

Displays telephone number (If no telephone number is set, dis- plays 0) Flashes Sounds i After moving to safe place, stop machine mmediately. Contact Komatsu distributor for repairs E04 Top line: Displays E04 Bottom line: Displays telephone number (If no telephone number is set, dis- plays 0) Flashes Sounds Stop machine immediately. Contact Komatsu distributor for repairs