Komatsu — Komatsu K EAM04 9 700 T Operation and Maintenance Manual for Bulldozers

MAINTENANCE SERVICE PROCEDURE 11. Push the button of dust indicator (1) and return the yellow piston to its original position. 12. Close the left engine side cover. REPLACING ELEMENT 1. Open the left engine side cover. 2. Remove four clips (2), then remove cover (3). 3. Remove outer element (4). Do not remove inner element (5) at this time, however. 4. Clean the interior of the air cleaner body, cover (3) and evacuator valve (6). NOTICE If the outer element and cover are installed when the inner element is not installed properly, the outer element may break. When installation is correct, protrusion “a“ of the inner element from the air cleaner body is 35 mm. 5.

Remove inner element (5), then quickly install the new inner element. Push the inner element in properly and check that it is fitted securely. 6. Set the new outer element (4) in position. 7. Replace O-ring (7) for cover (3) with new one. 8. Set the arrow mark on cover (3) at the top, install to the air cleaner body, then secure with clip (2). 4-21