Komatsu — Komatsu K EAM04 9 700 T Operation and Maintenance Manual for Bulldozers

HANDLING HYDRAULIC RIPPER ATTACHMENTS, OPTIONS MAINTENANCE 6 EVERY 250 HOURS SERVICE 6 LUBRICATING 1. Lower the ripper to the ground and stop the engine. 2. Using a grease pump, pump in grease through the grease fittings shown by arrows. 3. After greasing, wipe off any old grease that was pushed out. (1) Ripper cylinder foot pin (1 place) (2) Ripper cylinder rod end pin (1 place) (3) Link pin (8 places) CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL 1. Stop the machine on level ground. Set the blade perpendicular and lower it the ground, lower the ripper to the ground, then stop the engine. 2.

For details of checking the oil level in the hydraulic tank, see “CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL (4-48)“. SPECIFICATIONS 6 q Power angle, power tilt dozer 6-8 Item Unit D61EX-15 Operating weight (not including operator) kg (lb) 17,670 (38,962) Weight of ripper as individ- ual part kg (lb) 1,610 (3,550) A Overall length mm(ft in) 6,285 (20'7“) No. of shanks 3