OPERATION EXPLANATION OF COMPONENTS INFORMATION SWITCH This switch (7) is used to operate display panel B (multi-infor- mation). When the switch is released, it returns automatically to the cen- ter position. q When display panel B (multi-information) is in the operation mode turn the switch to to switch the display to service meter or engine speed. q When display panel B (multi-information) is in the maintenance mode It is used to move between sub modes, between items, to move the cursor, or to change values. For details, see “METHOD OF USING MAINTENANCE MODE (3-24)“. BUZZER CANCEL SWITCH This switch (8) is used to operate control panel B (multi-infor- mation) or to stop the alarm buzzer.
When the switch is released, it returns automatically to the cen- ter position. q When display panel B (multi-information) is in operation mode q When the alarm buzzer is sounding, turn this switch to the left or right to stop the buzzer. q If the switch is held at the (a) position for at least 2.5 seconds, the display switches to the maintenance mode. q When display panel B (multi-information) is in the maintenance mode „ position: Cancel or reset to operation mode ‘ position: Confirms selection or selected item For details, see “METHOD OF USING MAINTENANCE MODE (3-24)“. 3-23