© 1286 Job Card No.: 07.02.03 Page 4 of 4 Injection Pump Control Rod Removal / Refitment Engine: S/BV 6/8 M 628 0178-17-10 2054 Filing No.: Removing Control Rod of Pump No. 2 - Fig. 1 Remove connection rod (55) (job 05.04.14). Unscrew plug screw (64) - Fig. 2 - with sealing ring (206). Loosen and remove the cheese head screw (343) - Fig. 5 - underneath in the pump housing. Remove cover (277) and gasket (276). Take off the hex. nut (71) inside housing (345) with lock washer (106), and withdraw housing from the injection pump. Now proceed as described under “Removing Con- trol Rod of Pump No. 1”. Refitting Control Rod of Pump No.
2 2 The installation of the control rod is carried out in the reverse order to removal. Cheese head screw (343), © 25 348 1 however, is to be installed with Deutz DW 59 locking Fig. 5 compound. © 25 348 1 © 25 348 1