Deutz — 4.1.1 Preparation for Operating the Engine on blended Fuel (heavy Fuel)

© 0486 Operating the Engine Section: 4 Page: 4-0-05 Engine: S/BVM 628 4.1.1 Preparation for Operating the Engine on blended Fuel (heavy Fuel) (see also sections 7, 8.2, 8.3 and "Summarized Instructions" hereto).

A Commissioning run-in engines following a brief idle period B Commissioning engines following overhaul including replacements of pistons, cylinder liner or bearings C Commissioning new engines or run-in engines following a prolonged idle period (over 3 months) Item Job A B C Reference 1 Depreservation Remove all preserving agent linside and outside of engine G Section 6.5 2 Cylinder head Check inlet and exhaust valve clearance G G Job 01.01.01 Check that inlet and exhaust valves move freely in their guides G 3 Foundation bolts Inspect / tighten to the instruction of the building contractor G Job 03.07.01 4 Speed control system Check that control rod moves freely G Job 07.01.01 Check oil level in hydraulic governor Job 05.03.11 Change oil in hydraulic governor G Job 05.03.11 Bleed hydraulic governor G Job 05.03.12 5 Exhaust / turbocharging system Check oil level in turbocharger G G Job 06.05.01 Inspect turbocharger G Job 06.06.01 Check scavenging water quantity G G Job 06.13.03