© 0883 Section: 4 Operating the Engine Page: 4-0-06 Engine: S/BVM 628 Item Job A B C Reference 6 Fuel system Clean fuel service tank G Top up fuel service tank G G Clean fuel filter G G Job 07.10.01 Test fuel injectors G G Job 07.08.01 Check oil level in sealing oil tank G G Preheat fuel service tank G G G Section 6.3 Drain fuel service tank G G G Open shut-off valve of fuel service tank G G G Switch on sealing oil pump G G G Switch on fuel feed pump as 6+2 bar sealing oil pressure has been obtained G G G Heat separate f uel filter if engine has been stopped on heavy fuel G G G Section 6.3 Inserire l’impianto di regolazione della viscosità.
G G G Section 6.3 Bleed fuel system G G G Job 07.03.02 7 Lube oil system Switch on standby oil pump if used for priming pump G Top up lube oil reservoir G G G Check level in lube oil reservoir G G Clean lube oil filter G G G 08.10.01 Switch on priming pump and keep min. 0,35 bar pressure for min. 3 minutes G G G