Komatsu — SWITCHES

EXPLANATION OF COMPONENTS OPERATION REMOTE POSITIONER LOWER MODE SWITCH 0. (option) Use this switch (28) to turn on the remote positioner LOWER mode (operating the lift arm at below the horizontal position). Position (a): LOWER mode ON Position (b): OFF REMOTE POSITIONER RAISE/LOWER SET SWITCH 0. (option) Use this switch (29) to set the stopping position of the lift arm for the remote positioner. Position (a): After turning the remote positioner RAISE mode switch ON, raise the lift arm to the desired position above horizontal, then press the bottom (a) of this switch to set the top lift arm stop position at that point. Position (b):

After turning the remote positioner LOWER mode switch ON, lower the lift arm to the desired position below horizontal, then press the bottom (b) of this switch to set the bottom lift arm stop position at that point. If the setting is carried out properly, the buzzer will give short sounds. If the setting cannot be carried out, the buzzer gives a long sound. 3-50