Komatsu — SWITCHES

OPERATION EXPLANATION OF COMPONENTS DIRECTIONAL SELECTOR SWITCH 0. (option) This switch (24) is used to switch the direction of travel of the machine between forward and reverse. F Position: FORWARD N Position: Neutral R Position: REVERSE Before operating this switch, check that the condition is as fol- lows. Directional lever is at N Directional selector switch actuation switch is at ON If the condition is not as above, the switch will not work. For details, see “CHANGING DIRECTION ( 3-90 )“. DIRECTIONAL SELECTOR SWITCH ACTUATION SWITCH 0. (option) When this switch (25) is turned on, the directional selector switch on the side of the lift arm control lever is actuated. Position (a):

ON The directional selector switch is actuated. The directional selector pilot lamp on the machine monitor lights up. Position (b): OFF The directional selector switch is turned off. SEMI AUTO DIGGING SWITCH 0. (option) This switch (26) turns the semi auto digging ON or OFF. Position (a): HARD mode The bucket tilt actuation is controlled intermittently. Use this mode when handling heavy load materials. Position (b): SOFT mode The bucket tilt actuation is controlled continuously. Use this mode when handling crushed rock or other light load materials. N position: Semi auto digging is switched OFF In positions (a) and (b), the pilot lamp inside the switch lights up.

For details, see “SEMI AUTO DIGGING OPERATIONS ( 3-102 )“. REMOTE POSITIONER RAISE MODE SWITCH 0. (option) Use this switch (27) to turn on the remote positioner RAISE mode (operating the lift arm at above the horizontal position). Position (a): RAISE mode ON Position (b): OFF 3-49