Komatsu — CONTROL LEVERS, PEDALS

OPERATION EXPLANATION OF COMPONENTS SPEED CONTROL LEVER STOPPER 0. This stopper (3) prevents the speed control lever from entering the 3rd positions when working. Position (a): Stopper actuated. Position (b): Stopper released. SAFETY LOCK LEVER (FOR WORK EQUIPMENT LEVER) 0. Before standing up from the operator‘s seat, set the safety lock lever securely to the LOCK position. If the safety lock lever is not at the LOCK position, and work equipment control lever (A) is touched by mistake, it may lead to a serious accident. If the safety lock lever is not placed securely at the LOCK position, the work equipment may move, and this may lead to a serious accident or personal injury.

Check that the lever is in the position shown in the diagram. When pulling up or pushing down the safety lock lever, be careful not to touch work equipment con- trol lever (A). This lever (4) is a lock device for the work equipment control lever. Push the safety lock lever down to lock it. REMARK This lever electrically locks the hydraulic circuit for the work equipment, so if it is at the LOCK position, the work equipment will not move even when work equipment con- trol lever (A) is operated. If the work equipment control lever is operated when this lever is at the LOCK position, the central warning lamp lights up and the alarm buzzer sounds.

At the same time, “E00 WORK LEVER POSI“ is displayed on the character display. 3-55 WARNING