OPERATION OPERATION OPERATIONS AND CHECKS BEFORE STARTING ENGINE 0. WARNING Before starting the engine, check that the safety lock lever is securely at the LOCK position. If the work equipment control lever is touched by mistake when starting the engine, the work equipment may move unexpectedly and cause serious damage or personal injury. 1. Check that parking brake switch (1) is at the ON position. 2. Check that directional lever (2) is at the N position. When starting the engine, if directional lever (2) is not at the N position, the engine will not start. 3. Lower the bucket to the ground, then check that work equip- ment control lever (3) is locked by safety lock (4). 3-78