Komatsu — OPERATIONS AND CHECKS BEFORE STARTING ENGINE

OPERATION OPERATION 4. Insert the key in starting switch (5), turn the key to the ON position, and check that the machine monitor system works. When the starting switch is turned to the OFF position before starting the engine, all the monitors, gauges, and central warning lamp light up for approx. 3 seconds, and the alarm buzzer sounds for approx. 1 sec. If any monitor does not light up, there is probably a failure or disconnection, so contact your Komatsu distributor for inspection. In addition, after all the monitors, gauges, and central warn- ing lamp light up, a self check is carried out to check that the emergency steering function works properly.

For details, see “EMERGENCY STEERING SELF-CHECK FUNCTION ( 3-96 )“ in the OPERATION section. 3-79