Komatsu — CHECK AFTER STOPPING ENGINE

OPERATION OPERATION STOPPING ENGINE 0. NOTICE If the engine is abruptly stopped before it has cooled down, engine life may be greatly shortened. Conse- quently, do not abruptly stop the engine apart from an emergency. In particular, if the engine has overheated, do not abruptly stop it but run it at medium speed to allow it to cool gradu- ally, then stop it. 1. Run the engine at low idling for about 5 minutes to cool down gradually. 2. Turn the key of starting switch (1) to the OFF position to stop the engine. 3. Remove the key from starting switch (1). CHECK AFTER STOPPING ENGINE 0. 1.

Walk around the machine and check the work equipment, body work, and undercarriage, and check also for leakage of oil and water. 2. Fill the fuel tank. 3. Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard. 4. Remove any mud affixed to the undercarriage. 3-85