OPERATION OPERATION CHANGING GEAR SPEED 0. When traveling at high speed, do not shift gear suddenly. Use the brake to reduce the travel speed before shifting gear. Shift gear as follows. Move the gearshift lever (1) to the desired position to shift gear. When carrying out digging or loading operations, the operation is carried out in 1st or 2nd, so use the gearshift lever stopper. REMARK This machine is equipped with the kick-down switch. When the machine is traveling in 2nd, press the button on the tip of the lift arm control lever to shift down to 1st. We recommend use of the kick-down switch when carry- ing out operations in 1st or 2nd, such as digging or load- ing.
For details of the method of use, see “KICKDOWN SWITCH ( 3-44 )“. This machine is equipped with an auto-shift system that automatically shifts the gear. For details of the method of use, see “TRANSMISSION SHIFT MODE SELECTOR SWITCH ( 3-39 )“ and “AUTOMATIC SHIFT ( 3-53 )“. If the gearshift lever is operated slowly or is stopped between gear positions, “E01 MAINTENANCE“ may be displayed on the character display. In this case, there is no failure, but try to operate the gearshift lever so that the gearshifting is completed within 2 seconds. 3-89 WARNING