AUTOMATIC AIR-CONDITIONER ATTACHMENTS, OPTIONS FAN SWITCH 0. This switch (2) is used to adjust the air flow. The air flow can be adjusted to six levels. Press the switch to increase the air flow; press the switch to reduce the air flow. When the fan switch is pressed, the lamp at the top of the auto switch goes out. During auto operation, the air flow is automatically adjusted. Liquid crystal display Air flow Air flow "low" Air flow "medium 1" Air flow "medium 2" Air flow "medium 3" Air flow "medium 4" Air flow "high" TEMPERATURE CONTROL SWITCH 0. This switch (3) is used to control the temperature inside the cab. The temperature can be set between 18°C (64.4°F) and 30°C (86°F).
Press the switch to raise the set temperature; press the switch to lower the set temperature. The temperature is generally set at 25°C. The temperature can be set in stages of 0.5°C. 6-36 Monitor display (°C) Set temperature 18.0 Max. cooling 18.5 to 31.5 Adjusts temperature inside cab to set tem- perature 32.0 Max. heating