Komatsu — WORK EQUIPMENT LEVER

MULTIFUNCTION LEVER ATTACHMENTS, OPTIONS WORK EQUIPMENT LEVER 0. . Use this lever (1) to operate the lift arm and bucket. NOTICE Do not use the FLOAT position when lowering the bucket. Use the FLOAT position when leveling, see “LEVELING OPERATIONS ( 3-103 )“. Position (a): RAISE 0. When the work equipment control lever is pulled further from the RAISE position, the lever is stopped in this position until the lift arm reaches the preset position of the kickout, and the lever is returned to the HOLD position. Raise Position (b): HOLD 0. The lift arm and bucket stop and remain in the same position. AE41484B-A Lower Position (c): LOWER 0. Position (d): FLOAT 0.

The lift arm moves freely under external force. Position (e): TILT 0. When the work equipment control lever is pulled further from the TILT position, the lever is stopped in this position until the bucket reaches the preset position of the positioner, and the lever is returned to the HOLD position. Tilt Position (f): DUMP Dump 0. AE41485B-A 6-46