ATTACHMENTS, OPTIONS MULTIFUNCTION LEVER DIRECTIONAL SELECTOR SWITCH 0. This switch (2) is used to switch the directional of travel of the machine between forward and reverse. F Position: FORWARD N Position: Neutral R Position: REVERSE Before operating this switch, check that the condition is as fol- lows. Direction lever is at N Directional selector switch actuation switch is at ON If the condition is not as above, the switch will not work. For details, see “USING SWITCH TO CHANGE BETWEEN FORWARD AND REVERSE ( 6-49 )“.
REMARK When directional selector switch operation switch (3) is ON, if direction lever (2) is not at the N position and directional selector switch (4) is also not at the N position, the engine will not start. DIRECTIONAL SELECTOR SWITCH ACTUATION 0. When this switch (3) is turned on, the directional selector switch is actuated. Position (a): ON The directional selector switch is actuated. Position (b): OFF The directional selector switch is turned off. REMARK Turn this switch ON when the direction lever and directional selector switch are at the neutral position. At any other posi- tion, this switch does not work.
Even if the directional selector switch is functioning, when the direction lever is operated, the operation of the direction lever is given priority. 6-47