EXPLANATION OF COMPONENTS OPERATION RESET METHOD FOR FILTER, OIL REPLACEMENT TIME 0. The filter and oil replacement time is displayed on the character display, so if the filter and oil have been replaced, reset the filter and oil change time. 1. Press the ( ‘ ) of monitor panel mode selector switch 1, and display the odometer. 2. Press (>) or ( play "MAINTENANCE MONITOR". 3. Press the ( ‘ ) of monitor panel mode selector switch 1. It will change to the display in the diagram on the right. The bottom line shows two items: the replacement time on the left and the total number of times the item has been replaced on the right. 4.
Press the (>) or ( display the item (filter or oil) which has reached the replace- ment time. 5. Press the ( ‘ ) of monitor panel mode selector switch 1. It will change to the display in the diagram on the right. The top line shows [Reset] and [Item to be reset] in turn. 6. When resetting the replacement time, press ( „ ) of machine monitor mode selector switch 1. It will reset and returned to the previous screen. To abandon, align the cursor with “NO“, then press ( „ ) of monitor panel mode selector switch 1. 7. When resetting the replacement time for another item, carry out the procedure from Step 4.
After completing, press ( „ ) of monitor panel mode selector switch 1 twice or turn the starting switch OFF. 3-34