Komatsu — OTHER FUNCTIONS OF MACHINE MONITOR

OPERATION EXPLANATION OF COMPONENTS INPUT METHOD FOR TELEPHONE NUMBER 0. It is possible to display the telephone number on the right side of “CALL“ displayed on the character display when action code “E03“ is generated. 1. Press the ( ‘ ) of monitor panel mode selector switch 1, and display the odometer. 2. Press (>) or ( play "TEL". 3. Press ( ‘ ) of monitor panel mode selector switch 1. It will change to the display in the diagram on the right. Once the telephone number is input, the input number will be displayed next time. 4. Up to 12 digits can be displayed for the telephone number. Input from the first digits. The cursor is displayed at the input position. Press (>) or ( 9".

To leave a blank, select"*". When the input value is decided, press ( ‘ ) of monitor panel mode selector switch 1. The cursor will move to the next position. 5. Repeat the procedure in Step 4 until the last digit. At the last digit, press ( ‘ ) of monitor panel mode selector switch 1 to return to the previous screen. If there is a mistake in the input or the input is to be stopped, press ( „ ) of monitor panel mode selector switch 1 to return to the previous screen. 6. When completing the operation, press ( „ ) of monitor panel mode selector switch 2 twice or turn the starting switch OFF. 3-35