OPERATION EXPLANATION OF COMPONENTS FRONT WORKING LAMP SWITCH 0. Always turn the working lamp off before traveling on pub- lic roads. When turning the front working lamp ON, operate the lamp switch to turn the side clearance lamp ON or the head lamp ON, then operate this switch (10). Position (a): Working lamp lights up Position (b): Working lamp goes out If position (a) is pressed, the pilot lamp will light up and the working lamp circuit will be switched ON. If the lamp switch is not at the ON position for the side clearance lamp or head lamp, the working lamp will not light up. REAR WORKING LAMP SWITCH 0. WARNING Always turn the working lamp off before traveling on pub- lic roads.
When turning the rear working lamp ON, operate the lamp switch to turn the side clearance lamp ON or the head lamp ON, then operate this switch (11). Position (a): Working lamp lights up Position (b): Working lamp goes out If position (a) is pressed, the pilot lamp will light up and the working lamp circuit will be switched ON. If the lamp switch is not at the ON position for the side clearance lamp or head lamp, the working lamp will not light up. MONITOR PANEL MODE SELECTOR SWITCH 1 0. This switch (12) is used to switch the function of the character display. When the switch is released, it automatically returns to its origi- nal position. The basic operation is as follows. Position ( ‘ ):
Press here to select (confirm) each mode or operation Position ( „ ): Press here to cancel each mode or operation 3-43 WARNING