EXPLANATION OF COMPONENTS OPERATION HAZARD LAMP SWITCH 0. Use the hazard lamp only in emergencies. Using the haz- ard lamp when traveling will cause problems for other machines. This switch (8) is used in emergencies, such as when the machine breaks down and has to be parked on the road. ON position: All turn signal lamps flash. REMARK When this switch is turned to the ON position, the turn direction indicator lamps and turn indicator pilot lamp flash, and display lamp (A) lights up at the same time. PARKING BRAKE SWITCH 0. Always apply the parking brake when leaving the machine or when parking it.
Even if the parking brake switch is turned ON, there is danger until the parking brake pilot lamp lights up, so keep the brake pedal depressed. This switch (9) operates the parking brake. Position (a): ON The parking brake is applied, and the parking brake pilot lamp lights up. Position (b): OFF The parking brake is released. NOTICE Never use the parking brake switch to apply the brakes when traveling, except in an emergency. The parking brake may be damaged and this may lead to a serious accident. Apply the parking brake only after the machine has stopped.
If the parking brake has been used as an emergency brake when traveling at high speed, contact your Komatsu distributor to have the parking brake checked for any abnormality. REMARK When the parking brake is applied, the machine will not move off even if the directional lever is oper- ated. If the directional lever is placed at the F or R position with the parking brake still applied, the central warning lamp will light up and the buzzer will sound. At the same time, “E00 PARKING BRAKE“ will be displayed on the character display. Before starting the engine, turn the parking brake switch ON, then turn it OFF again. 3-42 WARNING WARNING