Komatsu — SWITCHES

OPERATION EXPLANATION OF COMPONENTS LAMP SWITCH 0. This switch (6) is used to light up the front lamps, side clear- ance lamps, tail lamps, and instrument panel. Position (a): OFF Position (b): Side clearance lamps, tail lamps, and instrument panel light up Position (c): Head lamps light up in addition to lamps at (b) position REMARK The lamp switch can be operated regardless of the posi- tion of the lever. TURN SIGNAL LEVER 0. This switch (6) is used to operate the turn signal lamp. (a) position : LEFT TURN (Push lever FORWARD.) (b) position : RIGHT TURN (Pull lever BACK.) REMARK When the lever is operated, the pilot lamp turn signal pilot lamp also flashes.

When the steering wheel is turned back, the lever auto- matically returns to its original position. If it does not return, return it by hand. DIMMER SWITCH 0. This switch (6) is used to switch the head lamps between high beam and low beam. Position (a): Low beam Position (b): High beam HORN BUTTON 0. When the horn button (7) in the center of the steering wheel is pressed, the horn will sound. 3-41