EXPLANATION OF COMPONENTS OPERATION TRANSMISSION CUT-OFF SWITCH 0. When moving the machine off on an uphill slope, set the transmission cut-off switch to the OFF position, depress the accelerator pedal while keeping the left brake pedal depressed, then gradually release the brake pedal and allow the machine to move. In this way the machine can be prevented from traveling backwards. Turn this switch (4) ON and OFF. When the switch is pressed, the pilot lamp lights up and the system is turned ON. The transmission is shifted to neutral at the adjusted brake depression position. Normally, keep the switch at the ON position.
For details of the method of adjusting the cut-off position, see “ADJUSTING TRANSMISSION CUT-OFF POSITION ( 3-94 )“ in the STOPPING MACHINE section. Position (a): OFF The left brake pedal acts in the same way as the normal brake (right brake pedal). Position (b): ON The left brake pedal acts in the same way as the normal brake, and at the same time, sets the transmission to neutral. REMARK The brake pedal position can be adjusted when the system is actuated with the transmission cut-off set switch on the right switch panel. TRANSMISSION CUT-OFF SET SWITCH 0. Apply the parking brake before adjusting the transmission cut-off position.
Turn this switch (5) ON and set to the transmission cut-off function to adjust the position where the brake is depressed to set the transmission to Neutral. Position (a): ON Cut-off position can be adjusted When the switch is released, it automatically returns to its origi- nal position. For details of the method of adjusting the cut-off position, see “ADJUSTING TRANSMISSION CUT-OFF POSITION ( 3-94 )“ in the STOPPING MACHINE section. 3-40 WARNING CAUTION